Honeycomb Mill for powder coating

Short Description:


  • Reading Volume:

Product Detail

Honeycomb Mill for powder coating

Working Principle

  The material enters the Ulm pulverizer through the quantitative feeding system, and the 200 ~ 300 ℃ hot air enters through the secondary air outlet. In the dispersing chamber, the turbulent collision between the materials is used to fully disperse and form a full heat exchange with the hot air. During the rising process of the material, it is continuously dried, and the dried water is taken away with the hot air. The dried material is controlled by the air classifier to meet the upper limit requirements of the final product, The qualified air enters the cyclone collector for collection with the air flow, the dust is filtered by the pulse dust collector, and the clean hot air enters the dispersing system through the return air system, so as to make full use of it and improve the thermal efficiency.

Features

  Advantages:

  It integrates drying and crushing functions, with high efficiency and low operation cost;

  It can withstand high temperature of 400 ℃, and the bearing adopts heat insulation design;

  The grinding block and grinding lining can be replaced, and the grinding block of different materials can be selected according to different materials;

  The internal grading wheel can be selected to grind coarse materials circularly in the mill;

  It can be connected with external heating air and realize drying and dispersing functions at the same time. Under the action of high-speed rotor, materials and hot air can be fully contacted in the crushing and dispersing area. The heat exchange area is large, and the water can be taken away effectively. The heat source can be used more efficiently, saving energy by 30% – 50% compared with traditional drying.

  Technical Parameters

Parameter / Model 350 500 750 1000 1250 1500 2000
Maximum speed (rpm) 5580 4130 2760 2070 1650 1400 1050
Linear speed of grinding disc (m/s) 102.3 108.1 108.3 108.3 108.3 110.0 110.0
Main engine power (kW) 30 55 90 110~132 160~200 250~315 315~355
Maximum air flow (m³/h) 4000 6000 12000 15000 20000 25000 35000
Minimum air flow (m³/h) 1250 2000 3000 4000 5000 6000 8000

Note:

The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above parameters are for reference only, please consult our engineers for details.

Are you interested in our products? Contact us

Write your message here and send it to us