Coating machine

Short Description:


  • Reading Volume:

Product Detail

Coating machine

Working Principle

  Principle and characteristics: the relative motion of three rotors can change the effect of cyclone and eddy current to realize the coating of powder surface. Without heating device, it has the advantages of low investment and low operation cost.

  Power range: 11kW ~ 225kW

  Maximum capacity: 6t/h

Features

  Advantages:

  The process is mature and investment is low, which is suitable for coating modification of stearic acid. Self-friction heat generation, less accessory equipment;

  It is suitable for the modification of 325 ~ 1250 mesh powder.

  Disadvantages:

  Low air volume, dispersion was weak, especially fine powder, with more modifier dosage;

  Self-friction heat generation is easy to be affected by environmental factors, and hard to control the modification temperature ;

  There is dead zone and low coating rate.

Model

SG200

SG3/300

SG3/600

SG3/900

Size (D97:10μm)

150kg/h

1.5t/h

3t/h

6t/h

Power

11kW

55.5kW

111kW

225kW

  Main specification

Model Main Power (kw) Blower Power (kw) Speed of Shaft (r.p.m) Capacity (kg/h) Weight (t) Overall Dimension (L*W*H)mm
CLG-200D 11 2.2 4600 40-150 1 3200*600*2200
CLG-3/300 3-18.5 5.5 4500 500-1800 3 5800*1800*5600
CLG-3/600 3-37 15-22 2700 2000-4000 10 11200*3100*6200
CLG-3/900 3-75 45 1800 4000-7000 20 21000*3800*6500
NOTE: Capacity is according to medium hard limestone.The size,humidity level and characters of materical swill influence the capacity.

Are you interested in our products? Contact us

Write your message here and send it to us

Product case